- #AS BUILT DRAWING FOR CONTRACTORS SERIAL#
- #AS BUILT DRAWING FOR CONTRACTORS SOFTWARE#
- #AS BUILT DRAWING FOR CONTRACTORS PROFESSIONAL#
If survey measurement is not practical prior to burial, the Contractor must measure and record approximate depth (nearest 6”) to the buried feature or utility crossing and place a stake directly above the feature or utility crossing that can be surveyed. The Contractor is responsible for coordinating with the Surveyor or Engineer during construction and shall ideally provide access to all utilities prior to being buried, allowing accurate horizontal and vertical measurements to be acquired by the Surveyor or Engineer.All changes requested by the MVWA as a result of their review must be made to both the stamped original set and the digital file. The MVWA will be allowed two (2) weeks for review of the as-builts.
Hand drawn measurements or revisions will not be accepted. An exception may be made for the Contractor to measure the depth to buried infrastructure (refer to B.4). All measurements are to be made by (or under the supervision of) the Surveyor or Engineer who will be certifying the project as constructed.
#AS BUILT DRAWING FOR CONTRACTORS PROFESSIONAL#
#AS BUILT DRAWING FOR CONTRACTORS SERIAL#
These plans may indicate where HVAC units are and their associated data such as size, serial numbers, and condition. They will show not only where electrical service and breaker panels are but also the various circuits and which areas they control.
An existing conditions set of drawings will go so far as to document locations of electrical and data outlets, include reflected ceiling plans, show HVAC return, registers, duct work, and sprinkler lines. While containing the information and benefits in a set of as-built plans, more data about the property is captured, resulting in more detailed plans.
#AS BUILT DRAWING FOR CONTRACTORS SOFTWARE#
Facility managers may use these plans and integrate them with a Computer Aided Facilities Management (CAFM) software package.Īn Existing Conditions survey likewise is created post construction. These areas are then divided to determine the load factor which defines the rentable square footage (RSF) of tenant spaces. Property managers and brokers will have the plans analyzed to identify the square footage of tenant areas, common areas, and major vertical penetrations. Most often as-built floor plans are utilized by building owners to determine the gross and rentable areas during the due diligence period prior to sale completion. In the latter case as-built plans serve to create an up to date documentation of the interior layout of many tenant spaces which may have changed over the years. Post construction can be either immediately after the site is built or many years afterwards.
Examples of deviations may be doors that were placed in a different location from what was specified in the construction documents to determining the actual size and shape of the building versus what was specified. The intention of these plans is to document any deviations from the architect’s original design. These plans are created after construction of the building is complete. The term as-built commonly refers to refers to 2D floor plans showing a limited amount of detail such as walls, doors, windows, millwork, and plumbing fixtures. In the world of building measurement and area calculations the terms as-built floor plans and existing conditions plans sound as if they are interchangeable but are in fact are not.